Olivetti 450 Bedienungsanleitung Seite 19
- Seite / 48
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
13
TO REGULATE THE RESOLUTION
Until the desired resolution value appears on the display.
The resolution should be regulated on the basis of
the following criteria:
•
STD
(STANDARD), if the document contains
easily leg-
ible characters
. An "arrow" appears on the bottom line of
the display in line with the "
" symbol printed on the
console.
•
FINE
, if the document contains
very small characters or
drawings
. An "arrow" appears on the bottom line of the
display in line with the "
" symbol printed on the console.
•
HALF TONES
, if the document contains
shaded areas
.
An "arrow" in line with the "
" symbol and an arrow in
line with the "
" symbol printed on the console appear
on the bottom line of the display.
TO SEND A DOCUMENT
Place the document in the ADF. The display shows on the
top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: "
" (standard).
If you want, change the contrast and resolution values as
described previously.
- Dial your correspondent’s number in any of the available
methods: directly on the numeric keypad or using the one-
touch keys (
- ) or speed dialling codes (see "
To set
one-touch and speed dialling
").
To start sending the document.
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
note
If you have entered any incorrect digits: position the cursor,
using the
|
/
}
keys, to the incorrect digit and overwrite it with
the correct one; if you want to delete the number altogether,
press the
key.
note
If you want you can dial the correspondent’s number us-
ing the quick dialling procedures, see "
To set one-touch
and speed dialling
", "
To send a document with one-
touch dialling
" and "
To send a document with speed
dialling
".
note
If you want
to abort the transmission in progress
, press
the
key. The fax machine unloads the document from
the ADF and returns to the initial stand-by mode.
If the document to be removed consists of more than one
sheet, before pressing
to unload the first,
remove
all
the others
by hand
.
TO HEAR THE DIALLING TONE WHEN SENDING A DOCUMENT
Place the document in the ADF. The display shows on the
top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: "
" (standard).
If you want, change the contrast and resolution values as
described previously.
To hear the dialling tones. The display shows:
OFF HOOK
And the length of the transmission in minutes and seconds in
the top right-hand corner.
- Dial your correspondent’s number in any of the available
methods: directly on the numeric keypad or using the one-
touch keys (
- ) or speed dialling codes (see "
To set
one-touch and speed dialling
").
As soon as you hear the tone of your correspondent’s fax
machine, press
to start sending the document. The
message "CONNECTING" appears on the display.
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
TO SEND A DOCUMENT WITH THE RECEIVER RAISED
Place the document in the ADF. The display shows on the
top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: "
" (standard).
If you want, change the contrast and resolution values as
described previously.
Lift the receiver to engage the line. The display shows:
OFF HOOK
And the length of the transmission in minutes and seconds in
the top right-hand corner.
- Dial your correspondent’s number in any of the available
methods: directly on the numeric keypad or using the one-
touch keys (
- ) or speed dialling codes (see "
To set
one-touch and speed dialling
").
If your correspondent’s fax machine is set up for
auto-
matic reception
, you will hear the
fax machine signal
.
If it is set up for
manual reception
, the correspondent
himself will answer so you can ask him to press the
start
key
on his fax machine, after which you will hear the
fax
machine signal
.
To start sending.
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
- Ink Jet Fax 1
- Copyright © 2004, Olivetti 2
- All rights reserved 2
- NSTALLATION 3
- QUICK GUIDE 4
- CONTENTS 5
- NTRODUCTION 7
- Connection sockets 8
- INDISPENSABLE FOR 10
- FUNCTIONING) 10
- TO SET THE DATE AND TIME 11
- TO ADD PAPER 11
- PROCEDURE 12
- O SET YOUR FAX NUMBER 13
- O CONNECT IT TO A PUBLIC LINE 14
- OMPONENTS 15
- TRANSMISSION 18
- RECEPTION 18
- OPERATIONS 18
- O REGULATE THE RESOLUTION 19
- O SEND A DOCUMENT 19
- THAT IS ALREADY SET 21
- PEED DIALLING 23
- DIALLING 23
- TO PRINT REPORTS AND LISTS 24
- Error codes 25
- Troubleshooting guide 25
- PHONE BOOK 27
- OFF HOOK 00:00 28
- INCOMING CALLS 28
- DOCUMENT READY 29
- COPY: HIGH QUAL 29
- ZOOM: 100% 29
- CONTRAST: NORMAL 29
- SIZE USED 30
- O DISPLAY THE CALLER ID 31
- O CHANGE THE NUMBER OF RINGS 31
- O CHANGE THE RING VOLUME 31
- O CHANGE THE SILENCE LAPSE 32
- FREQUENCY 32
- O HEAR THE LINE SIGNALS 34
- O ENABLE/DISABLE ECM 34
- FOR MINOR PROBLEMS 36
- ERROR CODES 37
- COUSTIC ERROR SIGNALS 38
- RROR MESSAGES ON THE DISPLAY 38
- THER ACOUSTIC SIGNALS 39
- THER MESSAGES ON THE DISPLAY 39
- NOZZLES 40
- PRINT HEAD 41
- TO CLEAN THE OPTICAL READER 41
- TO CLEAN THE CASING 42
- TO REMOVE JAMMED DOCUMENTS 42
- AND WINDOWS ME 43
- PRINT HEAD PRECAUTIONS 44
- TROUBLESHOOTING GUIDE 44
- ECHNICAL 45
- Colour print head part number 47
Verwandte Produkte und Handbücher für Telefone Olivetti 450
Telefone Olivetti 145D Bedienungsanleitung
(88 Seiten)
(88 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.201 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern